Interfacial bonding strength of Al-Pb bearing alloy strips and
hot dip aluminized steel sheets by hot rolling①
hot dip aluminized steel sheets by hot rolling①
(Department of Material Science and Engineering, Jilin University of Technology,
Changchun 130025, P.R.China)
Changchun 130025, P.R.China)
Abstract: Al-Pb alloy strips and hot dip aluminized steel sheets were successfully bonded together by hot rolling, and the interfacial bonding strengths after rolling was evaluated by a new method. The bonding modes were studied by optical and scanning electron microscope and energy dispersive X-ray analysis, and the effects of the thickness of the intermetallic layers and the Si content in hot dip aluminized layers on the interfacial bonding strength were also investigated respectively. It is found that the hot dipped steel and Al-Pb alloy are bonded through blank interface bonding and block interface bonding, and the total bonding strength mainly depends on that of blank interfaces and the fraction of blank interfaces. There is a linear relationship between the total bonding strengthFand the fraction of blank interfacesKb. The bonding strength varies with the Si content in the hot dipped aluminized layers on the surface of steel sheets, the fraction of blank interfaces and the rotation of the intermetallic blocks.
Key words: Al-Pb alloy; interface; hot rolling; interfacial bonding strength