Comparative study of microstructure and corrosion resistance of
electroless Ni-W-P coatings treated by laser and furnace-annealing
(1. School of Mechanical Engineering, Shandong Institute of Light Industry, Ji’nan 250100, China;
2. Corrosion and Protection Centre, School of Materials, The University of Manchester,
Manchester, M60 1QD, UK;
3 Zibo Institute of New Materials, Zibo 255040, China)
2. Corrosion and Protection Centre, School of Materials, The University of Manchester,
Manchester, M60 1QD, UK;
3 Zibo Institute of New Materials, Zibo 255040, China)
Abstract: A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented. Effects of different laser operating parameters and furnace-annealing conditions on microstructures, in terms of crystallisation, pores formation and grain growth, were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution. The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix, depending on annealing temperatures, whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates. Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions. Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion, grain sizes of both Ni and Ni3P phases, pores formation and residual stresses.
Key words: electroless Ni-W-P coating; laser-treatment; annealing; nano-crystallization; corrosion