Effects of Cr interlayer on mechanical and
tribological properties of Cr-Al-Si-N nanocomposite coating
tribological properties of Cr-Al-Si-N nanocomposite coating
(1. School of Materials Science and Engineering, Pusan National University, Busan 609-735, Korea;
2. National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan 609-735, Korea)
2. National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan 609-735, Korea)
Abstract: Cr-Al-Si-N coatings were deposited on SUS 304 substrate by a hybrid coating system. A Cr interlayer was introduced between Cr-Al-Si-N coating and SUS 304 substrate to improve the coating adherence. The effects of Cr interlayer on the microhardness, adhesion, and tribological behavior of Cr-Al-Si-N coatings were systematically investigated. The results indicate that the microhardness of the Cr-Al-Si-N coatings gradually deceases with increasing thickness of Cr interlayers. The adhesion between Cr-Al-Si-N and SUS 304 substrate is improved by addition of the Cr interlayers. A peak critical load of ~50 N is observed for the coating containing Cr interlayer of 60 nm as compared ~ 20 N for the coating without Cr interlayer. The thicker Cr interlayers result in reduced critical load values. Moreover, the wear resistance of the Cr-Al-Si-N coatings is greatly enhanced by introducing the Cr interlayer with thickness of 60 nm in spite of the decreased microhardness. The friction coefficient of the coating system is also moderately reduced.
Key words: Cr-Al-Si-N coating; Cr interlayer; hardness; adhesion; wear