Influences of fillet radius and draft angle on local loading process of
titanium alloy T-shaped components
titanium alloy T-shaped components
(State Key Laboratory of Solidification Processing, School of Materials Science and Engineering,
Northwestern Polytechnical University, Xi’an 710072, China)
Northwestern Polytechnical University, Xi’an 710072, China)
Abstract: In order to study influences of geometric parameters on the T-shaped components local loading process, a new mathematical model considering the fillet radius and draft angle was established by using the slab method. The results obtained by the mathematical model agree with the data form experiment and numerical simulation, and the results are closer to the experimental and simulation results. The influence of draft angle may be neglected under the forming conditions used. The influence of fillet radius is notable, especially in the case that the ratio of fillet radius to rib width is less than 0.75.
Key words: fillet radius; draft angle; T-shaped component; local loading; slab method