Effect of configuration on magnetic field in cold crucible using for
continuous melting and directional solidification
continuous melting and directional solidification
(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract: To improve the power efficiency and optimize the configuration of cold crucible using for continuous melting and directional solidification (DS), based on experimental verification, 3D finite element (FE) models with various configuration-elements were developed to investigate the magnetic field in cold crucible. Magnetic flux density (B) was measured and calculated under different configuration parameters. These parameters include the inner diameter (D2), the slit width (d), the thickness of crucible wall, the section shape of the slit and the shield ring. The results show that the magnetic flux density in z direction (Bz) both at the slit and at the midpoint of segment will increase with the decrease of D2 or with the increase of the width of the slit and the section area of wedge slit or removing the shield ring. In addition, there is a worst wall thickness that can induce the minimum Bz for a cold crucible with a certain outer diameter.
Key words: cold crucible; magnetic flux density; configuration design; directional solidification