Wrinkling prediction in rubber forming of Ti-15-3 alloy
(School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China)
Abstract: Wrinkling is a common failure in the sheet metal forming of titanium owing to the relatively poor ability to shrink. It is important to predict wrinkling accurately in the sheet metal forming without costly trials. The ABAQUS/Explicit code was utilized to predict the wrinkling behavior in the sheet metal forming of Ti-15-3 alloy sheets. In terms of the comparison of wrinkling behavior between the simulation and experiment of the Fukui’s conical cup tests at room temperature, the sensitivities of wrinkling simulation to various input parameters were evaluated comprehensively and quantitatively. Prediction of wrinkling and influence of rubber hardness on the winkling behavior in the rubber forming of convex flange were investigated quantitatively and validated by the rubber forming experiments. The excellent agreements between the simulations and the experiments confirmed the accuracy of the prediction.
Key words: Ti-15-3 alloy; wrinkling; convex flange; rubber forming; quantitative analysis