Effect of thermo-mechanical treatment process on microstructure andmechanical properties of 2A97 Al-Li alloy
(1. Key Laboratory of Aerospace Materials and Performance, Ministry of Education,
School of Materials Science and Engineering, Beihang University, Beijing 100191, China;
2. College of International Economic and Trade, Liaoning University of International Business and Economics,
Dalian 116052, China)
School of Materials Science and Engineering, Beihang University, Beijing 100191, China;
2. College of International Economic and Trade, Liaoning University of International Business and Economics,
Dalian 116052, China)
Abstract: 2A97 Al-Li alloy was processed by thermo-mechanical treatment at different pre-stretch deformations of 0, 3% and 6%. The microstructure observation results reveal that some δ′ and T1 precipitates are found in α(Al) matrix of 2A97 alloy processed by the heat treatment with no pre-stretch deformation. When the pre-stretch deformation is 3% and 6%, respectively, amounts of tiny T1 and a few of S′ precipitates precipitates are observed in the microstructures of 2A97 alloy. The tensile test results show that the tensile properties of 2A97 alloys are improved via thermo-mechanical treatment. When the pre-stretch deformation is from 0, 3% to 6%, the ultimate tensile strength values of the 2A97 alloys increase gradually from 447.7, 516.5 to 534.3 MPa, and the elongations decrease from 17.6%, 12.8% to 10.2%, respectively. Moreover, with increasing pre-stretch deformation amount from 0 to 6%, the in-plane anisotropy value of 2A97 alloys becomes more obvious.
Key words: 2A97 Al-Li alloy; thermo-mechanical treatment; pre-stretch deformation; microstructure; mechanical properties