Preparation and wear properties of TiB2/Al-30Si composites via in-situ melt reactions under high-energy ultrasonic field
(1. School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China;
2. School of Mining Engineering, Hebei United University, Tangshan 063009, China)
2. School of Mining Engineering, Hebei United University, Tangshan 063009, China)
Abstract: TiB2/Al-30Si composites were fabricated via in-situ melt reaction under high-energy ultrasonic field. The microstructure and wear properties of the composite were investigated by XRD, SEM and dry sliding testing. The results indicate that TiB2 reinforcement particles are uniformly distributed in the aluminum matrix under high-energy ultrasonic field. The morphology of the TiB2 particles is in circle-shape or quadrangle-shape, and the size of the particles is 0.1-1.5 μm. The primary silicon particles are in quadrangle-shape and the average size of them is about 10 μm. Hardness values of the Al-30Si matrix alloy and the TiB2/Al-30Si composites considerably increase as the high energy ultrasonic power increases. In particular, the maximum hardness value of the in-situ composites is about 1.3 times as high as that of the matrix alloy when the ultrasonic power is 1.2 kW, reaching 412 MPa. Meanwhile, the wear resistance of the in-situ TiB2/Al-30Si composites prepared under high-energy ultrasonic field is obviously improved and is insensitive to the applied loads of the dry sliding testing.
Key words: TiB2/Al-30Si composite; in-situ melt reaction; high-energy ultrasonic field; wear properties