ISSN: 1003-6326
CN: 43-1239/TG

Vol. 25    No. 12    December 2015

[PDF]    [Flash]
Sulfur composition on surface ofchalcopyrite during its bioleaching at 50 °C
Shi-fa WU, Cong-ren YANG, Wen-qing QIN, Fen JIAO, Jun WANG, Yan-sheng ZHANG
(School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China)
Abstract: The composition of passive layer of chalcopyrite was investigated by X-ray photoelectron spectroscopy (XPS), accompanied with cyclic voltammetry (CV). The leaching experiment shows that the extraction rates of Cu with leaching for 30 d by sterile control and microorganisms are 4.0% and 21.5%, respectively. In comparison, 3.8% and 10.5% Fe are leached by sterile control and microorganisms, respectively. The results of XPS studies suggest that Fe atoms dissolve preferentially from the chalcopyrite lattice, and disulfide (S22-), polysulfide (Sn2-) and elemental sulfur (S0) are identified on the chalcopyrite surfaces leached by sterile control and microorganisms. Additionally, sulfate (SO42-) is detected on the chalcopyrite surfaces leached by microorganisms, and most of it probably originates from jarosite. The analysis of CV results reveals that metal-deficient sulfide (Cu1-xFe1-yS2-z, y>x) and elemental sulfur (S0) passivate the surface of chalcopyrite electrode. The elemental sulfur and/or jarosite coating on the chalcopyrite surface may have impact on the leaching process; however, the disulfide, polysulfide or metal-deficient sulfide plays a more key role in the chalcopyrite leaching.
Key words: bioleaching; chalcopyrite; passive layer; electrochemistry
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9