Effects of low melting point metals (Ga, In, Sn) onhydrolysis properties of aluminum alloys
(1. School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China;
2. Hubei Provincial Key Laboratory of Green Materials for Light Industry,
Hubei University of Technology, Wuhan 430068, China;
3. School of Materials Science and Engineering, Hubei University of Technology, Wuhan 430068, China;
4. School of Science, Hubei University of Technology, Wuhan 430068, China)
2. Hubei Provincial Key Laboratory of Green Materials for Light Industry,
Hubei University of Technology, Wuhan 430068, China;
3. School of Materials Science and Engineering, Hubei University of Technology, Wuhan 430068, China;
4. School of Science, Hubei University of Technology, Wuhan 430068, China)
Abstract: Low melting point metals (Ga, In, Sn) as alloy elements were used to prepare Al-In-Sn and Al-Ga-In-Sn alloys through mechanical ball milling method. The effects of mass ratio of In to Sn and Ga content on the hydrolysis properties of aluminum alloys were investigated. X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy disperse spectroscopy (EDS) were used to analyze the compositions and morphologies of the obtained Al alloys. The results show that the phase compositions of Al-In-Sn ternary alloys are Al and two intermetallic compounds, In3Sn and InSn4. All Al-In-Sn ternary alloys exhibit poor hydrolysis activity at room temperature. Al-In-Sn alloy with the mass ratio of In to Sn equaling 1:4 has the highest hydrogen yield. After Ga is introduced to the ternary alloys, the hydrolysis activity of aluminum alloys at room temperature is greatly improved. It is speculated that the addition of Ga element promotes the formation of defects inside the Al alloys and Ga-In3Sn-InSn4 eutectic alloys on the alloys surface. Al atoms can be dissolved in this eutectic phase and become the active spots during the hydrolysis process. The small size and uniform distribution of this eutectic phase may be responsible for the enhancement of hydrolysis activity.
Key words: aluminum alloy; low melting point metal; hydrolysis;hydrogen generation; mechanical ball milling method