Effects of hot compression on carbide precipitation behavior of Ni-20Cr-18W-1Mo superalloy
(State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China)
Abstract: The effect of hot compression on the grain boundary segregation and precipitation behavior of M6C carbide in the Ni-20Cr-18W-1Mo superalloy was investigated by thermomechanical simulator, scanning electronic microscope (SEM) and X-ray diffraction (XRD). Results indicate that the amount of M6C carbides obviously increases in the experimental alloy after hot compression. Composition analyses reveal that secondary M6C carbides at grain boundaries are highly enriched in tungsten. Meanwhile, the secondary carbide size of compressive samples is 3-5 μm in 10% deformation degree, while the carbide size of undeformed specimens is less than 1 μm under aging treatment at 900 and 1000 °C. According to the thermodynamic calculation results, the Gibbs free energy of γ-matrix and carbides decreases with increase of the compression temperature, and the W-rich M6C carbide is more stable than Cr-rich M23C6. Compared with the experimental results, it is found that compressive stress accelerates the W segregation rate in grain boundary region, and further rises the rapid growth of W-rich M6C as compared with the undeformed one.
Key words: Ni-20Cr-18W-1Mo superalloy; hot compression; grain boundary segregation; carbide precipitation