ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Vol. 31    No. 10    October 2021

[PDF]    [Flash]
Development of viscosity model for aluminum alloys using BP neural network
Heng-cheng LIAO1, Yuan GAO1, Qi-gui WANG2, Dan WILSON2
(1. Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China;
2. Materials Technology, GM Global Product Group, 30003 Fisher Brothers Road, Warren, MI 48093, USA
)
Abstract: Viscosity is one of the important thermophysical properties of liquid aluminum alloys, which influences the characteristics of mold filling and solidification and thus the quality of castings. In this study, 315 sets of experimental viscosity data collected from the literatures were used to develop the viscosity prediction model. Back-propagation (BP) neural network method was adopted, with the melt temperature and mass contents of Al, Si, Fe, Cu, Mn, Mg and Zn solutes as the model input, and the viscosity value as the model output. To improve the model accuracy, the influence of different training algorithms and the number of hidden neurons was studied. The initial weight and bias values were also optimized using genetic algorithm, which considerably improve the model accuracy. The average relative error between the predicted and experimental data is less than 5%, confirming that the optimal model has high prediction accuracy and reliability. The predictions by our model for temperature- and solute content-dependent viscosity of pure Al and binary Al alloys are in very good agreement with the experimental results in the literature, indicating that the developed model has a good prediction accuracy.
Key words: BP neural network; aluminum alloy; viscosity; genetic algorithm; prediction model
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9