The corrosion behavior of the Ti_34.3Zr_31.5Cu₅Ni_5.5Be_23.7 bulk amorphous alloy was investigated in different concentrations of the HCl and H₂SO₄ solutions. Electrochemical testing and scanning electron microscopy analysis indicate that Cl^- ions can cause pitting damage in the HCl solution during the polarization process, and the pitting potential decreases with increasing solution concentration. The degree of damage to the corroded surface is positively correlated with the solution concentration. A passive film forms in the H₂SO₄ solution, indicating good corrosion resistance. X-ray photoelectron spectroscopy shows that the stability of the passivated film decreases with increasing HCl solution concentration. The corrosion rates of the four materials were obtained by an immersion experiment in HCl solution. The results reveal that Ti_34.3Zr_31.5Cu₅Ni_5.5Be_23.7 bulk amorphous alloy has the best corrosion resistance, with a corrosion rate of 7.22×10^-3 mm/a, which is approximately 1/1294 that of 316L stainless steel.