ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 16 Sepecial 3 December 2006
Aluminum Materials
- 1
- Solidification and remelting of Al through Al2O3 fibrous preform under centrifugal force
- 胡国新，刘建局，张利祥，田芩蔚
- 2
- Explicit FE wrinkling simulation and method to catch critical bifurcation point in tube bending process
- 杨合，李恒，詹梅，谷瑞杰
- 3
- Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment
- 樊喜刚，蒋大鸣，孟庆昌，李念奎，孙兆霞
- 4
- Thin-walled aluminum alloy tube NC precision bending based on finite element simulation
- 谷瑞杰，詹梅，李恒，杨合
- 5
- Microstructure and mechanical properties of friction stir welded thin sheets of 2024-T4 aluminum alloy
- 李炼，佟建华，万发荣，龙毅
- 6
- Structure optimization of porthole die based on aluminum profile extrusion process numerical simulation
- 吴向红，栾贻国，娄淑梅，马新武，赵国群
- 7
- Semisolid metal forming by novel sloping plate process
- 管仁国，王超，尚剑洪，邢振环
- 9
- Contrast of FEM and FVM in simulation of complex aluminum extrusion
- 李大永，周飞，苌群峰，彭颖红
- 11
- Microstructures and tensile properties of hot-extruded composite Bi2O3-coated ABOw/Al composite
- 李志军，王黎东，岳红彦，费维栋
- 12
- Interfacial study of semi-solid aluminum alloy and stainless steel sheathed extrusion
- 刘洪伟，郭成，刘旭峰，邵光杰
- 13
- Distribution of Si particles in hypereutectic aluminum alloy tubes prepared under electromagnetic field
- 张志清，刘庆，李丘林，刘伟
- 15
- Deforming mechanism of non-mandrel drawing process of circular aluminium tube by simulation
- 权国政，周杰，王梦寒，权国辉，佟莹
- 16
- Effect of laser shock processing on residual stress and fatigue behavior of 6061-T651 aluminum alloy
- 任旭东，张永康，周建忠，冯爱新
- 17
- Microstructural evolution of aluminum alloy 3003 during annealing
- 吴文祥，张新明，孙德勤，胡国强，刘国金
- 18
- A new model to describe effect of plastic deformation on elastic modulus of aluminum alloy
- 臧顺来，臧顺来，郭成，董伟，魏公际，谌峰，张珂
- 19
- Micromechanical model for competition between intergranular and intragranular fracture in 7××× aluminum alloys
- 张新明，刘文辉，唐建国，刘胜胆
- 20
- Compound fabrication technology of semi-solid billet of Al-Si alloy based on SIMA method
- 薛克敏，王清瑞，弭光宝
- 21
- Effects of pitting corrosion on fatigue life of aluminum alloy Y12CZ based on initial discontinuity state
- 郁大照，陈跃良，胡家林，杨茂胜
- 22
- Effects of deformation temperature and rate on compressive deformation behaviour of Y112 die cast aluminum alloy in semi-solid state
- 杨明波，胡红军，唐丽文，代兵
- 24
- Extrusion behavior of micro-nanostructured Al-18%Si alloy powders
- 梁红玉，欧阳志英，胡志恒，毛协民
- 25
- Effect of Y2O3 on microstructure and mechanical properties of hypereutectic Al-20%Si alloy
- 杨亚锋，许长林，王慧远，刘畅，姜启川
- 27
- Grain refinement of hypoeutectic Al-Si alloy prepared with ELTA by Al-4B master alloy
- 王明星，孟祥永，刘志勇，刘忠侠，翁永刚，宋天福，杨升
- 29
- Low-cyclic fatigue properties of electrolytic low-titanium A356 alloys
- 刘忠侠，宋谋胜，翁永刚，王明星，宋天福，刘志勇
- 30
- Comparison of microstructure and corrosion properties of Al-Zn-Mg-Cu alloys 7150 and 7010
- 孟庆昌，任时宇，张新梅，张宝友，樊喜刚
- 32
- Microstructure and properties of in situ A356/TiB2 composite
- 乐永康，乐永康，陈东，马乃恒，王浩伟，张文静，毛健伟
- 33
- Effects of trace addition of vanadium and depression amount on recrystallization temperature and mechanical performance of 5182 belts
- 高家诚，陈志强，王勇，崔先友，明文良，袁礼军
- 34
- Effect of two-stage aging on superplasticity of Al-Li alloy
- 罗智辉，张新明，杜予晅，叶凌英
- 35
- Superplastic behavior of Al-Cu-Li based alloy
- 杜予晅，张新明，叶凌英，罗智辉
- 36
- Sound absorption and insulation property of closed-cell aluminum foam
- 尉海军，李兵，姚广春，罗洪杰，刘宜汉，王晓林
- 37
- Interface structure and mechanical property of aluminum cooler vacuum brazing joint
- 冯涛，楼松年，吴鲁海，李亚江
- 38
- Deformation behavior of A6063 tube with initial thickness deviation in free hydraulic bulging
- 杨连发，杨连发，郭成，邓洋
- 39
- Effects of electromagnetic field intensity on as-cast microstructures and mechanical properties of Al-Zn-Mg-Cu-Zr alloy
- 左玉波，赵志浩，王启伟，崔建忠
- 40
- Mensuration and simulation of mold filling process in emi-solid die-cast of aluminum alloy
- 杨弋涛，王建甫，张恒华，邵光杰
- 41
- CO2 laser welding of 5A06 aluminum alloy plates with different thicknesses
- 余淑荣，余淑荣，樊丁，熊进辉，陈剑虹
- 42
- Superplasticity and superplastic forming ability of Al-Mg-Sc alloy
- 陈明和，张杰刚，李金华，芮玉龙
- 44
- Effect of united refining and modification on mechanical properties of A356 aluminium alloys
- 左秀荣，仲志国
- 45
- Influence of additive element on surface oxide film of A356 alloy
- 欧阳志英，梁红玉，毛协民，红梅
- 47
- Numerical simulation of thermal-mechanical process of Al-Si-Pb alloy treated by high current pulsed electron beam
- 吕晓霞，李荣广，安健
- 49
- Effect of TiH2 on preparation of closed-cell aluminum foam and its compressive behavior
- 杨国俊，姚广春，尉海军
- 50
- Sound absorption property of open-pore aluminum foams
- 王录才，王录才，王芳，武建国，游晓红
- 51
- Aging behavior of AlNp/2024Al composites fabricated by squeeze casting
- N. KONO，T. HAITANI
- 52
- Thermo-physical properties of reproducible Sip/Al composites
- 修子扬，武高辉，宋美慧，朱德志
- 53
- Stress—strain curves for different loading paths and yield loci of aluminum alloy sheets
- 吴向东，吴向东，万敏，韩非，王海波
- 54
- Multi-wall carbon nanotubes reinforced aluminum composites synthesized by hot press sintering and squeeze casting
- 张学习，杨丽，邓春锋，王德尊
- 55
- Simulation of local effect of reinforcement on temperature field during solidification of aluminum metal matrix composite
- 傅宇碧，张学习，王德尊
- 56
- Effect of T6I6 and its modified processes on mechanical properties of novel high strength Al-Li alloy-2A97
- 袁志山，袁志山，陆政，谢优华，吴秀亮，戴圣龙，刘常升
- 57
- Effect of coating thickness on microstructures and mechanical properties of C/Cu/Al composites
- 曹卓坤，姚广春，刘宜汉
- 58
- Accelerated corrosion test and corrosion failure distribution model of aircraft structural aluminum alloy
- 柳文林，穆志韬，金平
- 60
- Effects of heat treatment process on stress corrosion cracking and microstructures of 7A05 Al alloy plate
- 蔡刚毅，吕广庶，马壮
- 61
- Determination of strain criterion of Portevin–Le Chatelier effect for aluminum alloy sheets
- 万敏，韩金全，金海霞，伍惠，董锦亮，李兵，顾伟
- 62
- Effect of rare earth (RE) on diffusion of aluminum atoms in aluminizing
- 张伟，叶晓枫，庞碧君，周思凯
- 63
- Microstructure and mechanical properties of 2D woven Grf/Al composite
- 张云鹤，张云鹤，武高辉，修子扬，张强，王春雨，陈国钦
- 64
- Electroless nickel plated graphite fibers and surface behavior in Gr(Ni)/6061Al composite
- 王春雨，武高辉，张强，张云鹤，修子扬，陈国钦
- 65
- Crystal preferential orientation of Al-1.0%Si alloy in continuous unidirectional solidification process
- 张鸿，王自东，谢建新，王瑛伟，陈亚军
- 66
- Stress corrosion cracking susceptibility of 7A52 aluminum alloy
- 赵军军，王卫欣，蔡志海，张平
- 67
- Corrosion resistance of 2195 aluminum alloy treated by multi-step-heating-rate controlled process
- 许越，刘玉峰，耿季平
- 68
- Dendrite coherency point of A357 alloys
- 李建峰，寇宏超，王安家，傅恒志，胡锐，李金山
- 69
- Constitutive description of casting aluminum alloy based on cylindrical void-cell model
- 陈斌，彭向和，吴新燕，孙士涛，曾祥国
- 70
- Tensile properties of 2024 Al alloy processed by enhanced solid-solution and equal-channel angular pressing
- 许晓静，曹进琪，莫纪平，程晓农
- 71
- Solidification microstructures and mechanism of grain refinement of electrolytic low titanium Al alloys
- 王爱琴，王爱琴，谢敬佩，刘忠侠，闫淑卿，李继文，王文焱
- 72
- Pressureless infiltration processing and thermal properties of SiCp/Al composites with high SiC particle content
- 周贤良，邹爱华，华小珍，张建云，饶有海
- 73
- Effects of Mg content on aging behavior of sub-micron Al2O3p/Al-Cu-Mg composite
- 姜龙涛，朱德智，陈国钦，修子扬，武高辉
- 75
- Microstructures variation of spray formed Si-30%Al alloy during densification process
- 魏衍广，熊柏青，张永安，刘红伟，王锋，朱宝宏
- 76
- Defect analysis of complex-shape aluminum alloy forging
- 单德彬，张艳秋，王勇，徐福昌，徐文臣，吕炎
- 77
- Grain-refining persistency of Al-based alloy produced by electrolyzing
- 刘志勇，王明星，刘忠侠，翁永刚，宋天福，左秀容，杨昇
- 78
- Simplified prediction model for elastic modulus of particulate reinforced metal matrix composites
- 王文明，王文明，潘复生，鲁云，曾苏民
- 79
- Adhesive strength and structure of micro-arc oxidation ceramic coatings grown in-situ on LY12 aluminum alloy
- 吴振东，姚忠平，姜兆华
- 81
- Key techniques of automatic gauge control and profile control for aluminium strip and foil
- 李谋渭，刘鸿飞，王向丽，尹凤福，边新孝，张磊，童朝南
- 82
- Competitive growth of high purity aluminum grains in directional solidification
- 张佼，疏达，王德林，孙宝德，陈刚
- 83
- Deformation and microstructure characterization during semi-solid extrusion of Al-4Cu-Mg alloy
- 卢雅琳，卢雅琳，李淼泉，李兴成
- 84
- Effect of precipitation on elastic modulus of Al-Zn-Mg-Cu-Li alloys
- 赵中魁，周铁涛，刘培英，李焕喜
- 85
- Localized corrosion of LY12CZ under stress in chloride media
- 饶思贤，张峥，朱立群，钟群鹏
- 86
- Effect of titanium addition on fracture toughness behavior of ZL108 alloy
- 翁永刚，李姿景，刘文才，宋天福，刘志勇，王明星
- 87
- Effect of magnesium in aluminum alloys on characteristics of microarc oxidation coatings
- 刘耀辉，于思荣，朱先勇，徐佰明，李颂
- 88
- Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension
- 罗应兵，李大永，彭颖红
- 89
- Effect of porosity on damping behavior of aluminum matrix-fly ash composites
- 窦作勇，武高辉，姜龙涛，丁佰锁，曹金华
- 91
- Structure and properties of ceramic coatings formed on aluminum alloys by microarc oxidation
- 刘万辉，鲍爱莲，刘荣祥，武万良
- 92
- A new high strength and high tolerance-resistance Al-Li alloy
- 杨守杰，陆政，戴圣龙，韩雅芳，颜鸣皋
Magnesium Materials
- 93
- As-cast microstructure of Mg-Al-Zn magnesium alloys
- 张静，潘复生，杨明波，李忠盛
- 94
- Microstructure and mechanical properties of AZ31-0.5%Si alloy processed by ECAP
- 王渠东，陈勇军，张陆军，林金宝，翟春泉
- 95
- Improvement of corrosion resistance of AZ91D magnesium alloy by gadolinium addition
- 周学华，周学华，卫中领，陈秋荣，甘复兴
- 96
- Mechanical properties of Mg-9Gd-4Y-0.6Zr alloy
- 肖阳，陈部湘，邓桢桢，张新明
- 98
- Establishment of hydrogen measurement system for magnesium alloy melt
- 许四祥，吴树森，毛有武，安萍
- 99
- Numerical simulation of microstructure formation of AZ91 using mCA method
- 何柏林，黎秋萍，齐清岩，姚向东
- 100
- Effect of vacuum on solidification process and microstructure of LFC magnesium alloy
- 刘子利，刘子利，刘希琴，徐江，郭华明，潘青林，周海涛
- 101
- Microstructures and mechanical properties of AZ91D magnesium alloy processed by low pressure die casting
- 蒋海燕，于彦东，翟春泉，付彭怀
- 102
- Age hardening characteristics and mechanical properties of Mg-3.5Dy-4.0Gd-3.1Nd-0.4Zr alloy
- 李德辉，董杰，曾小勤，卢晨，丁文江
- 103
- Effect of cooling rate on microstructure and compressive performance of AZ91 magnesium alloy
- 杨林，冯辉，邱克强，陈立佳，刘正
- 104
- Microstructure and mechanical properties of Mg-6Al-4RE-0.4Mn alloy
- 王建利，彭秋明，吴耀明，王立民
- 105
- Effects of Zn content on as-cast microstructure and mechanical properties of Mg-xZn-4A1 alloys containing TiC and rare earth elements
- 白亮，潘复生，杨明波
- 106
- Effect of minor RE addition on microstructures and mechanical properties of AZ31 magnesium alloy
- 钟皓，闫蕴琪，张慧，翁文凭，陈琦
- 107
- Annealing behavior of rolled AZ31 alloy sheet
- 彭伟平，曾攀，李培杰
- 108
- Compression behavior of magnesium-lithium alloy at room temperature
- 王聪，李卓群，徐永波，韩恩厚
- 109
- Precipitation behavior and effect of new precipitated β phase in AZ80 magnesium alloy
- 唐伟，韩恩厚，徐永波，刘路
- 110
- Microstructure, mechanical properties and age-hardening of Mg-Li alloy sheets
- 李红斌，姚广春，郭志强，吉海宾，刘宜汉
- 111
- Effects of hot extrusion and annealing treatment on microstructures, properties and texture of AZ31 Mg alloy
- 张慧，闫蕴琪，翁文凭，陈琦，钟皓
- 112
- Effects of Ca addition on tensile properties and microstructures of hot-extruded AZ91 alloy tube
- 王峰，刘正，于宝义，张奎
- 113
- Tensile properties of AZ31 sheet/bar and effects of texture
- G. ITOH，Y. MOTOHASHI
- 114
- Microstructures and mechanical properties of hot rolled AZ31 Mg alloy sheets
- 范立坤，董杰，曾小勤，丁文江，张平
- 115
- Effect of large deformation on microstructure of ZK60 alloy
- 林金保，林金保，王渠东，陈永军，张陆军，丁文江
- 116
- Influence of texture and microstructure on mechanical properties of high-strength wrought magnesium alloy AZ80
- J. LINDEMANN，C. LEYENS
- 118
- Mechanical properties and microstructures of hot extruded AE42 alloy with addition of zinc
- 王峰，刘正，陈立佳，于宝义，林立
- 120
- Influence of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy
- 王岭，田素贵，孟凡来，杜洪强
- 121
- Effect of erbium on microstructure and thermal compressing flow behavior of Mg-6Zn-0.5Zr alloy
- 王忠军，邵晓宏，张彩碚，崔建忠，乐启炽
- 122
- Effect of rolling process on microstructures and mechanical properties of AZ31B alloy sheets
- 乐启炽，张志强，崔建忠
- 123
- Influence of multilayer coatings on AZ31 deposited by electron beam evaporation
- 王雪敏，曾小勤，姚寿山，赖依建
- 124
- Corrosion and electrochemical behavior of AZ31D magnesium alloys in sodium chloride
- 单大勇，韩恩厚，柯伟，周婉秋，周婉秋
- 125
- Effect of T4 and T6 treatment on corrosion of die cast AZ91D magnesium alloys in 3.5% NaCl
- 周婉秋，周婉秋，单大勇，韩恩厚，柯伟
- 126
- Electroplating zinc transition layer for electroless nickel plating on AM60 magnesium alloys
- 王晓民，周婉秋，周婉秋，韩恩厚
- 127
- Improving wear resistance of magnesium alloy AZ91D by TiN-CrN multilayer coating
- 缪强，缪强，崔彩娥，潘俊德，张平则
- 128
- Corrosion behavior of WE54 magnesium alloy in 3.5%NaCl solution
- 李卓群，陈荣石，柯伟，韩恩厚，单大勇
- 130
- Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation
- 赵晖，赵晖，刘正，陈立佳，陈吉，韩忠
- 131
- Influence of pH value on chromate-free conversion coating for magnesium alloys
- 翁文凭，陈琦，张慧，闫蕴琪，钟皓
- 132
- Direct electroless Ni-P plating on AZ91D magnesium alloy
- 李忠厚，渠毓萍，郑峰，戴阿赶
- 133
- Thickness effects on corrosion and wear resistance properties of micro-arc discharge oxide coatings on AZ91D magnesium alloys
- 黄伟九，刘明，李兆峰，曾荣昌
- 134
- Effect of heat diffusion on properties of zinc-aluminum coating on AZ91D magnesium alloys
- 李兆峰，黄伟九，刘明
- 136
- Processing and mechanical properties of SiC particulate reinforced AZ91 composites fabricated by stir casting
- 王晓军，吴昆，彭德林，张海峰，郑明毅，黄文现
- 137
- Structural characterization and property of in-situ synthesized AZ91-Mg2Si composite
- 董龙祥，许国根，王立民，吴耀明，豆传国
- 138
- Synthesis of Mg-Cu-Gd amorphous alloy by mechanical alloying and its thermal stability
- 许春霞，潘复生，汤爱涛，胡耀波，王敬丰
- 139
- Grain refinement of Mg-Al magnesium alloys by carbon inoculation
- 王朝辉，康永林，赵鸿金，徐跃
- 140
- Preparation of AZ91 alloy by powder metallurgy method
- I. S. HUMAIL，WANG Xi-tao
- 141
- Preparation and characterization of porous magnesium materials
- 刘希琴，刘子利，张晓红，丰俊东，俞挞汐
- 142
- Grain size refinement of magnesium composite alloys by addition of B2O3
- S. TANAKA，M. TSUSHIDA，S. ANDO，H. TONDA
- 143
- Development of magnesium composite alloy by a new method combining B2O3 addition and melt stirring
- 卜乐平，S.TANAKA，M. TSUSHIDA，S. ANDO，H. TONDA
- 144
- Microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion
- 陈勇军，林金宝，张陆军，翟春泉，王渠东
- 145
- Fretting wear behavior of AZ91D magnesium alloy
- 陈安华，黄伟九，李兆峰
- 146
- Effect of Mg-Zn-Y quasicrystals on microstructure and mechanical properties of AZ91 alloy
- 张金山，裴利霞，杜宏伟，许春香，卢斌峰，梁伟
- 147
- Effects of heat-treatment on microstructure of wrought magnesium alloy ZK60
- 麻彦龙，麻彦龙，潘复生，左汝林，张津，杨明波
Aerospace Materials
- 148
- Effect of anisotropy on microstructure and high temperature stress rupture properties of Ni3Al base single crystal alloy
- 孔志刚，李树索，韩雅芳
- 149
- Influence of microstructure stability on creep properties of single crystal nickel base superalloys
- 田素贵，孟凡来，杜洪强，王春涛，水丽，胡壮麒
- 151
- γ/γ′ interface strengthening of Re in single crystal superalloys
- 骆宇时，李嘉荣，刘世忠，韩梅，曹春晓
- 152
- Microstructure and interface reaction of investment casting TiAl alloys
- 陈玉勇，孔凡涛，王雪，肖树龙
- 154
- Effect of rare earth additives on alumina fiber development in Ti-Al intermetallic matrix composites
- 王芬，王芬，范志康，林营
- 156
- Synthesis of TiAl-Ti2AlN composites by in-situ crystallization
- 朱建锋，朱建锋，高积强，王芬
- 157
- Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming
- 曾好平，徐文骥，方建成，赵紫玉，王莉
- 158
- Phase composition and structure of grain boundary of oversintered Y3Al5O12 ceramics
- 李长青，左洪波，韩杰才，张明福，孟松鹤，姚泰
- 159
- Microstructure and properties of modified and conventional 718 alloys
- 刘芳，刘芳，孙文儒，郭守仁，杜金辉，董建新，杨洪才，胡壮麒
- 161
- Tensile and fracture behavior of DZ951 Ni-base superalloy
- 储昭贶，储昭贶，于金江，赵乃仁，孙晓峰，管恒荣，胡壮麒
- 162
- Effects of electric field treatment on microstructures of GH4199 superalloy after long-term aging
- 刘杨，王帅，王磊，乔雪璎，王延庆
- 163
- Influence of phosphorus on oxidation behavior of low thermal expansion superalloy IN909 at 650 ℃
- N. K. PARK
- 164
- Density of liquid NiCoAlCr quarternary alloys measured by modified sessile drop method
- 方亮，张淑芳，杨凌川，董建新，肖锋，曹春兰，陶再南，
- 165
- Isothermal oxidation behavior of cast Ni-base superalloy K44
- 李云，刘学贵，郭建亭，袁超，杨洪才
- 166
- Effect of carbon on microstructure and mechanical properties of DD99 single crystal superalloy
- 于金江，孙晓峰，管恒荣，胡壮麒，赵乃仁，金涛
- 167
- Effect of cobalt on chemical segregation and solution process in Re-containing single crystal superalloys
- 王文珍，王文珍，金涛，赵乃仁，王志辉，孙晓峰，管恒荣，胡壮麒
- 168
- Laser engineered net shaping of Co-based superalloys
- 薛春芳，戴耀，田欣利
- 169
- Morphological evolution of γ′ phase in K465 superalloy during thermal fatigue
- 杨金侠，杨金侠，郑启，孙晓峰，管恒荣，胡壮麒
- 170
- Finite element analysis of γ′-phase raft mechanism in Ni-based single crystal superalloy
- 吴文平，汪越胜，郭雅芳
- 171
- Mechanical properties and microstructure of Fe3Al intermetallics fabricated by mechanical alloying and spark plasma sintering
- 何箐，贾成厂，孟杰
- 172
- Compressive behavior of NiAl/(Cr,Mo)Hf alloy prepared by high-pressure die casting and hot isostatic pressing
- 杜兴蒿，郭建亭，武保林
- 173
- Effect of Cr on high temperature oxidation of TiAl
- 董自强，姜惠仁，冯晓然，王中雷
- 176
- Phase-field simulation of phase separation in Ni75AlxV25-x alloy with elastic stress
- 李永胜，陈铮，卢艳丽，王永欣
- 177
- Microstructure and high-temperature mechanical properties of Nb-silicide based in-situ composites
- 刘东明，姜荣丽，沙江波
- 178
- Effect of carbon on tribological property of plasma carburized TiAl based alloy
- 刘小萍，刘小萍，田文怀，郭朝丽，贺志勇，徐重
- 179
- Effect of Si content on mechanical properties of Nb-Si based alloys with NbSS/ Nb5Si3 structure
- 郑鹏，刘东明，宫声凯，徐惠彬，沙江波
- 180
- Structural defects in L10 FePt by modified analytic embedded-atom method
- 舒小林，陈强，陈子瑜，胡望宇
- 181
- Oxidation behavior of ternary Fe-15Cu-5Al and Fe-85Cu-5Al alloys in pure oxygen at 900 ℃
- 向军淮，向军淮，向军淮，牛焱，段先志
- 182
- Effect of 5%Cr on oxidation of Ni-10Al in 0.1MPa O2 at 900 ℃ and 1 000 ℃
- 张学军，张学军，高春香，牛焱
- 183
- Microstructure and properties of β-NiAl and its eutectic alloy with Cr and Mo additions
- 张志刚，刘先斌，宫声凯，徐惠彬
- 184
- Oxidation and hot corrosion behavior of Ti2AlNb-based alloy with and without enamel coating at 800 ℃
- 郑德有，熊玉明，朱圣龙，李明升，王福会
- 185
- Synthesis of TiAl-Al2O3 composites by high energy milling and hot-press sintering
- 朱建锋，朱建锋，高积强，王芬
- 186
- Effect of deformed microstructure on mechanical properties of Ti-22Al-25Nb alloy
- 程云君，李世琼，梁晓波，张建伟
- 187
- Microstructure and high temperature mechanical properties of laser rapidly formed Ti-6Al-4V alloy
- 薛蕾，林鑫，吕晓卫，王维，黄卫东，陈静
- 188
- Flow behavior and microstructure evolution during hot compression of TA15 titanium alloy
- 徐文臣，单德彬，杨国平，吕炎
- 189
- Hydrogen-induced hot workability in Ti-6Al-4V alloy
- 宗影影，单德彬，吕炎，郭斌
- 190
- Aging properties and microstructures of Ti-B20 titanium alloy
- 葛鹏，葛鹏，赵永庆，周廉
- 191
- Plasma boronizing of Ti6AlV4 using solid precursors by double glow plasma alloying technique
- 秦林，曲均志，林乃明，范爱兰，常大庆，唐宾
- 192
- Isothermal precision forging of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy impeller with twisted blades
- 单德彬，史科，徐文臣，吕炎
- 194
- Influence of processing parameters on microstructure and wear resistance of Ti+TiC laser clad layer on titanium alloy
- 武万良，孙俭峰，董胜敏，刘荣祥
- 195
- Plasma surface alloying of titanium alloy for enhancing burn-resistant property
- 张平则，徐重，姚正军，张高会，贺志勇
- 196
- Laser rapid forming of low cost hydride-dehydride titanium alloy powder
- 陈静，张凤英，林鑫，谭华，黄卫东
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9