ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW

Open Access

Vol. 26    No. 7    July 2016

Structural Materials

1
Primary-transient creep and anelastic backflow of pure copper deformed at low temperatures and ultra-low strain rates
Jun-jie SHEN, Ken-ichi IKEDA, Satoshi HATA, Hideharu NAKASHIMA
2
Effect of processing route on grain refinement in pure copper processed by equal channel angular extrusion
Chao-lan TANG, Hao LI, Sai-yi LI
3
Microstructural characterization and dry sliding wear behavior of spark plasma sintered Cu-YSZ composites
Jafar MIRAZIMI, Parvin ABACHI, Kazem PURAZRANG
4
Microstructure and dry sliding wear behavior of Cu-Sn alloy reinforced with multiwalled carbon nanotubes
H. M. MALLIKARJUNA, K. T. KASHYAP, P. G. KOPPAD, C. S. RAMESH, R. KESHAVAMURTHY
5
Tensile deformation behaviors of pure nickel fine wire with a few grains across diameter
Chuan-jie WANG, Chun-ju WANG, Jie XU, Peng ZHANG, De-bin SHAN, Bin GUO, Zhen-long WANG
6
Effects of Si addition on microstructure, mechanical and thermal fatigue properties of Zn-38Al-2.5Cu alloys
Ting LIU, Nai-chao SI, Guang-lei LIU, Rui ZHANG, Chang-yang QI
7
Effects of grain refinement and residual elements on hot tearing of A713 aluminium cast alloy
Anil Kumar BIRRU, D. BENNY KARUNAKAR
8
Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate
K. JESHURUN LIJAY, J. DAVID RAJA SELVAM, I. DINAHARAN, S. J. VIJAY
9
Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites
Sareh MOSLEH-SHIRAZI, Farshad AKHLAGHI, Dong-yang LI
10
Effects of sliding velocity and normal load on tribological behavior of aged Al-Sn-Cu alloy
Sheng-cheng ZHANG, Qing-lin PAN, Jie YAN, Xing HUANG
11
Preparation of semi-solid ZL101 aluminum alloy slurry by serpentine channel
Shu-jian CHENG, Yu-hong ZHAO, Hua HOU, Yu-chun JIN, Xiao-xiao GUO
12
Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-6Zn-0.5Y-2Sn alloy
Han-song XUE, Zhi-hui XING, Wei-na ZHANG, Gang YANG, Fu-sheng PAN
13
Microstructure evolution and mechanical properties of Mg-7Gd-3Y-1Nd-1Zn-0.5Zr alloy
Meng LI, Kui ZHANG, Zhi-wei DU, Xing-gang LI, Ming-long MA
14
Diffusion bonding of Al 7075 and Mg AZ31 alloys: Process parameters, microstructural analysis and mechanical properties
Seyyed Salman SEYYED AFGHAHI, Mojtaba JAFARIAN, Moslem PAIDAR, Morteza JAFARIAN
15
Evolving properties of friction stir spot welds between AA1060 and commercially pure copper C11000
Mukuna P. MUBIAYI, Esther T. AKINLABI
16
Interaction among deformation, recrystallization and phase transformation of TA2 pure titanium during hot compression
Kai LI, Ping YANG
17
Effect of solid carburization on surface microstructure and hardness of Ti-6Al-4V alloy and (TiB+La2O3)/Ti-6Al-4V composite
Hong-qiang DUAN, Yuan-fei HAN, Wei-jie Lü, Jian-wei MAO, Li-qiang WANG, Di ZHANG
18
Microstructure and evolution of (TiB2+Al2O3)/NiAl composites prepared by self-propagation high-temperature synthesis
Xiao-jie SONG, Hong-zhi CUI, Li-li CAO, P. Y. GULYAEV
19
Relationship between microstructure and mechanical properties of undercooled K4169 superalloy
Ke-ren ZHANG, Fa-qin XIE, Rui HU, Xiang-qing WU
20
Friction and wear behaviors of Nb-Ti-Si-Cr based ultrahigh temperature alloy and its Zr-Y jointly modified silicide coatings
Xuan LI, Xi-ping GUO, Yan-qiang QIAO
21
Identification of processing window for extrusion of large thick-walled Inconel 625 alloy pipes using response surface methodology
Liang-gang Guo, Li Dang, He Yang, Jun Zhang, Wen-da Zheng

Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering

22
Static and dynamic tensile failure characteristics of rock based on splitting test of circular ring
Di-yuan LI, Tao WANG, Teng-jiao CHENG, Xiao-lei SUN
23
Strength characteristics of dry and saturated rock at different strain rates
Zi-long ZHOU, Xin CAI, Yuan ZHAO, Lu CHEN, Cheng XIONG, Xi-bing LI
24
Comparison of mechanical properties in high temperature and thermal treatment granite
Tu-bing YIN, Rong-hua SHU, Xi-bing LI, Pin WANG, Xi-ling LIU
25
Feasibility of stochastic gradient boosting approach for predicting rockburst damage in burst-prone mines
Jian ZHOU, Xiu-zhi SHI, Ren-dong HUANG, Xian-yang QIU, Chong CHEN
26
Stability of undercut space in fragment orebody based on key block theory
Jian-hua HU, Chun YANG, Ke-ping ZHOU, Jie-lin LI, Feng GAO
27
Reliability analysis of piles constructed on slopes under laterally loading
Chong JIANG, Tian-bin LI, Ke-ping ZHOU, Zhao CHEN, Li CHEN, Zi-long ZHOU, Lin LIU, Ce SHA
28
Application of Hilbert-Huang transform based delay time identification in optimization of short millisecond blasting
Xiu-zhi SHI, Xian-yang QIU, Jian ZHOU, Xin CHEN, Yu-qian FAN, Er-wei LU
29
Dynamic experiments on flocculation and sedimentation of argillized ultrafine tailings using fly-ash-based magnetic coagulant
Shuai LI, Xin-min WANG, Qin-li ZHANG
30
Integration system research and development for three-dimensional laser scanning information visualization in goaf
Zhou-quan LUO, Jun-jie HUANG, Zhen-yan LUO, Wei WANG, Ya-guang QIN
31
Prediction of rock burst classification using cloud model with entropy weight
Ke-ping ZHOU, Yun LIN, Hong-wei DENG, Jie-lin LI, Chuan-ju LIU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9