ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 28 No. 5 May 2018
Structural Materials
- 1
- Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys
- Hua-qiang LIN,, Ling-ying YE, Lin SUN, Tao XIAO, Sheng-dan LIU, Yun-lai DENG,, Xin-ming ZHANG,
- 2
- Influence of different solution methods on microstructure, precipitation behavior and mechanical properties of Al-Mg-Si alloy
- Guan-jun GAO, Chen HE, Yong LI, Jia-dong LI, Zhao-dong WANG, R. D. K. MISRA
- 3
- Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy
- M. H. GHONCHEH, S. G. SHABESTARI, A. ASGARI, M. KARIMZADEH
- 4
- Quantitative analysis of orange peel during tension of 6063 alloy spun tubes
- Yang CAI, Xiao-song WANG,, Shi-jian YUAN,
- 5
- Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing
- M. AMRA, Khalil RANJBAR, S. A. HOSSEINI
- 6
- Solidification behavior of 6061 wrought aluminum alloy during rheo-diecasting process with self-inoculation method
- Ming LI, Yuan-dong LI,, Hong-qiang ZHENG, Xiao-feng HUANG,, Ti-jun CHEN,, Ying MA,
- 7
- Effects of secondary phases on texture and mechanical properties of as-extruded Mg-Zn-Er alloys
- Ke LIU, Jin-xue LIU, Shu-bo LI, Zhao-hui WANG, Wen-bo DU, Qing-feng WANG
- 8
- Tensile behaviors of fatigued AZ31 magnesium alloy
- Yang SHU, Xi-yan ZHANG, Jiang-ping YU, Li TAN, Rui-sen YIN, Qing LIU
- 9
- Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling
- Ru MA, Yue LU, Ling WANG, Yi-nong WANG
- 10
- Effect of predeformation on globularization of Ti-5Al-2Sn-2Zr-4Mo-4Cr during annealing
- Lian LI, Miao-quan LI
- 11
- Influences of gap size and cyclic-thermal-shock treatment on mechanical properties of TLP bonded IN-738LC superalloy
- Vahid MALEKI, Hamid OMIDVAR, Mohammad-Reza RAHIMIPOUR
Functional Materials
- 12
- Effect of thermomechanical processing on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy
- Jian-xin FU, Cheng-ming CAO, Wei TONG, Liang-ming PENG
- 13
- Microstructure evolution of Al0.6CoCrFeNi high entropy alloy powder prepared by high pressure gas atomization
- Shang-cheng ZHOU, Peng ZHANG, Yun-fei XUE,, Fu-chi WANG,, Lu WANG,, Tang-qing CAO, Zhen TAN, Bao-yuan CHENG, Ben-peng WANG
- 14
- Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy
- Mohammad MOAZAMI-GOUDARZI, Aram NEMATI
- 15
- Microstructure, sintering behavior and mechanical properties of SiC/MoSi2 composites by spark plasma sintering
- Xin-xin HAN, Ya-lei WANG, Xiang XIONG, Heng LI, Zhao-ke CHEN, Wei SUN
- 16
- Elastic modulus of nanocrystalline cemented carbide
- Xue-mei LIU, Hai-bin WANG, Xiao-yan SONG, Riccardo MOSCATELLI
- 17
- Green synthesis of Ag nanoparticles: Effect of algae life cycle on Ag nanoparticle production and long-term stability
- Oksana VELGOSOVA, Anna MRA？íKOVá, Elena ？I？MáROVá, Jaroslav MáLEK
- 18
- Structure and denitration performance of carbon-based catalysts prepared from Cu-BTC precursor
- Li ZHANG, Lei HUANG, Yi-hong QIN, Bai-zhen CHEN
Computational Materials Science and Numerical Modelling
- 19
- Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching
- Lei KANG, Gang ZHAO, Ni TIAN, Hai-tao ZHANG
- 20
- Effect of clad ratio on interfacial microstructure and properties of cladding billets via direct-chill casting process
- Hai-tao ZHANG, Xing HAN, Dong-tao WANG, Bo SHAO, Ke QIN, Jian-zhong CUI
- 21
- Numerical simulation for macrosegregation in direct-chill casting of 2024 aluminum alloy with an extended continuum mixture model
- Hai-jun LUO, Wan-qi JIE, Zhi-ming GAO, Yong-jian ZHENG
Mining, Mineral Processing, and Metallurgical Engineering
- 22
- Thermal dehydration kinetic mechanism of Mn1.8Co0.1Mg0.1P2O7？2H2O using Málek’s equations and thermodynamic functions determination
- Chuchai SRONSRI
- 23
- Separation of arsenic and antimony from dust with high content of arsenic by a selective sulfidation roasting process using sulfur
- Cheng TAN, Lei LI, Da-peng ZHONG, Hua WANG, Kong-zhai LI
- 24
- A new mixed-valent iron arsenate black crystal
- Jin-qin YANG, Qing-zhu LI,, Li-yuan CHAI,, Qing-wei WANG,, Hui LIU,, Xiao-bo MIN,, Rui-yang XIAO,
- 25
- Preparation of sodium manganate from low-grade pyrolusite by alkaline predesilication-fluidized roasting technique
- Xiang-yi DENG, Ya-li FENG, Hao-ran LI, Zhu-wei DU, Jin-xing KANG, Cheng-lin GUO
- 26
- Adsorption of copper ions on porous ceramsite prepared by diatomite and tungsten residue
- Qing-xiu JING,, Yun-yan WANG, Li-yuan CHAI, Chong-jian TANG, Xiao-dong HUANG, Huan GUO, Wei WANG, Wei YOU
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9