ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 15 Sepecial 3 November 2005
- 1
- Effect of Ce-rich mish metals and electromagnetic stirring on microstructure of AZ91D magnesium alloy
- 杨宝亮，陈可，汪涛，胡孝昀，周衡志，李子全
- 2
- Effect of residual-stress on microyield behavior of Al alloy reinforced by SiCp
- 李多生，左敦稳，陈同彩，张建云，周贤良，华小珍
- 3
- Aging behaviors of Al-Cu-Li-Zr alloy containing Sc
- 梁文杰，潘青林，朱朝明，何运斌，刘元斐
- 4
- Influence of quench on ageing response and mechanical properties of Al-Zn-Mg-Cu-Zr alloy
- 樊喜刚，蒋大鸣，孟庆昌
- 6
- Effect of heat treatment on high-cycle fatigue behavior of Mg-Zn-Y-Zr alloy
- 刘志浩，徐永波，刘路，韩恩厚，高国忠
- 7
- Microstructures and tensile properties of AZ31 magnesium alloy thin sheet
- 戴瑜，刘希琴，刘子利，陈照峰，孙国佩
- 8
- Deformation behavior and microstructure of NiAl-Cr(Mo) alloy by powder metallurgical technique
- 高强，刘午，郭建亭，淮凯文，张俊善
- 9
- Synthesis and characterization of Fe3Al intermetallic nanopowder by hydrogen arc plasma method (HP)
- 尹衍生，董丽华，范春华
- 11
- Preparation and mechanical properties of NiCoCrAlY/NiCr laminates by electron beam physical vapor deposition
- 韩杰才，李垚，赫晓东，孟松鹤，曾岗，陈宏平
- 12
- High-cycle fatigue behavior of nickel-base single crystal superalloy
- 刘源，于金江，徐岩，胡壮麒，孙晓峰，管恒荣
- 14
- Evaluation of new Ni-based superalloy prepared by EB-PVD
- 李晓海，韩杰才，孟松鹤，陈贵清
- 15
- Thermal fatigue crack initiation in K465 superalloy
- 杨金侠，胡壮麒，郑启，孙晓峰，管恒荣
- 17
- Microstructure and mechanical properties of rapidly solidified NiAl-based eutectic alloy
- 李虎田，郭建亭，高强，叶恒强
- 18
- Influence of boron on mechanical properties of M951 alloy
- 周鹏杰，于金江，胡壮麒，孙晓峰，管恒荣
- 19
- Influence of cooling way on microstructure and stress rupture property of DZ951 nickel base alloy
- 夏鹏成，于金江，胡壮麒，孙晓峰，管恒荣
- 20
- Microstructure and mechanical properties of Nb-doped NiAl-Cr(Mo) eutectic prepared by injection casting
- 淮凯文，郭建亭，杨锐，高强
- 21
- Evolution of TaC morphology during directional solidification of Ni, Cr, Al-TaC in-situ composite
- 于金江，胡壮麒，张军，孙晓峰，管恒荣，傅恒志
- 23
- Microstructure and thermal and electric conductivities of high dense Mo/Cu composites
- 陈国钦，武高辉，朱德志，张强，姜龙涛
- 24
- Microstructure and properties of Sip/4032Al composite
- XIU Zi-yang，ZHANG Qiang，SONG Mei-hui，ZHU De-zhi，WU Gao-hui
- 25
- Damping characterization of magnesium matrix composites prepared by in-situ synthesis technique
- 张修庆，廖利华，马乃恒，王浩伟
- 26
- Microstructure and properties of in-situ TiB2 particulates reinforced A356 composite
- 张亦杰，江盛玲，马乃恒，王浩伟，李险峰
- 27
- Effective elastic moduli of in-situ A356/TiB2 composites
- 易宏展，李险峰，马乃恒，王浩伟，张亦杰
- 28
- Copper matrix composites reinforced respectively with nano-SiO2 and nano-AlN particles
- WU Yu-cheng，，，，
- 29
- Microstructure and properties of copper matrix composites reinforced by nano-SiC and nano-Al2O3 particles
- 汪峰涛，吴玉程，任榕，王涂根，王文芳
- 34
- Grain refinement technique of refractory low alloy steel
- 李庆芬，崔秀芳，龙萍，陈洪彬
- 39
- Aging precipitation and recrystallization in re-aged copper alloy
- 刘平，田保红，郅晓，雷静果，任凤章
- 40
- Loss in coherency and coarsening behavior of Cr precipitates in Cu-Ag-Cr alloy
- 雷静果，任凤章，井晓天，刘平，田保红，郅晓
- 41
- Microstructure and mechanical properties of spray-formed Cu-1.2Cr alloy
- 王晓峰，赵九洲，何杰，王江涛，李中原
- 43
- Microstructure and performance of electrodeposited nanocrystalline Ni-W alloys
- 任榕，吴玉程，舒霞，史成武，郑玉春，李云
- 44
- Preparation and hot-dip galvanizing application of CeO2/Zn nanocomposite
- 骆心怡，左敦稳，王珉，李顺林，常华
- 46
- Nanocrystalline 2J4 alloy processed by equal channel angular pressing
- 杜忠泽，王经涛，魏法明，杜建铭
- 47
- Microstructure and properties of Ni-based superalloy sheet prepared by EB-PVD
- 赫晓东，宋广平，林秀，孙跃，李垚
- 48
- Numerical simulation of mechanics of electron beam physical vapour deposition Ni/Ni3Al microlaminates
- 李垚，张小朋，赵奕杰
- 50
- Thickness distribution of large scale metallic sheet by EB-PVD on rotating substrate
- 单英春，赫晓东，李垚，李明伟
- 52
- Shape evolution and prediction of three dimensional workpieces in electrochemical machining
- WANG Lei，
- 53
- Jet electrodeposition oriented by rapid prototyping
- 陈劲松，黄因慧，刘志东，田宗军，赵阳培
- 54
- Pulse electroforming of nickel under perturbation of hard particles
- 朱增伟，朱荻，曲宁松，雷卫宁
- 55
- Analysis of varying velocity on edge effects in laser bending
- 沈洪，石永军，姚振强，胡俊
- 56
- Edge effects of metal plate in laser forming
- 石永军，沈洪，姚振强，胡俊
- 58
- Development of micro wire electrical discharge machining platform and its application
- 黄瑞宁，狄士春，迟关心，赵万生
- 59
- Development of HSPECM set-up and its experiments
- 狄士春，赵万生，迟关心，吴海波
- 61
- Sintering zone prediction in direct metal laser sintering by finite element method
- 沈显峰，黄建峰，王洋，杨家林，姚进
- 62
- Application of improved vacuum degassing technique to refinement of heat resistant steel P91
- 刘江南，介万奇
- 65
- Effects of thermal cycling on shear strength of soldered joints of laminar ceramic resistor
- 薛松柏，王慧，胡永芳
- 67
- FEM analysis of stress and strain and evaluation on reliability of soldered CBGA joints under thermal cycling
- 胡永芳，薛松柏，吴玉秀
- 69
- Effect of electrode wear on weld nugget formation in resistance spot welding of magnesium alloy
- 王亚荣，冯吉才，张忠典
- 71
- Influence of filler metal and processing on brazed joints of TiAl alloy and 42CrMo
- 朱颖，王国建，李文轶，张茉，康慧，曲平
- 73
- Effect of fillet on bi-adhesive bonded aluminum lap joints
- 游敏，严沾谋，郑勇，熊惟皓，郑小玲，戴晟
- 77
- Work hardening of adhesively bonded pure copper single lap joints
- 郑小玲，熊惟皓，郑勇，游敏，余海洲，刘文俊
- 78
- Method of visional detecting MAG weld pool information
- 王克鸿，汤新臣，虞剑，游秋榕，沈莹吉
- 80
- A novel anti-corrosion coating for magnesium alloy
- 黄巍，李荻，郑天亮
- 81
- Composite material of cermets made by SHS
- 王凤辉，焦安源，杨似琼，高兴歧
- 84
- Phase and microstructure of CVD alumina-silica coating deposited at relative low temperature
- 陈照峰，赵保荣，朱秀荣，严波，李聪
- 86
- Preparation process and friction-abrasion property of TiN/TiB2 multi-permeation layer
- 隗晓云，王建忠，刘燕萍，徐晋勇，高原，徐重
- 87
- Ceramic alloying with Ti-N deposition and diffusion of multi-layers by plasma surface alloying technique
- 刘燕萍，徐晋勇，隗晓云，王建忠，高原，徐重
- 88
- Plasma surface alloying with molybdenum and carburization of TiAl based alloys
- 刘小萍，许玮，梁文萍，郭朝丽，田文怀，徐重
- 90
- Laser cladding of Ti-6Al-4V titanium alloy with Ti+TiC powders
- 武万良，张迎春，李学伟，孙俭峰
- 91
- Fabrication of iron disilicide from multilayer by helicon plasma sputtering
- 沈鸿烈，杨颖，SAKAMOTO Isao，KOIKE Masaki，MAKITA Yunosuke
- 92
- Formation and dispersal of rod-like α-SiAlON seed crystals synthesized by combustion method
- 傅仁利，J.M.F.Ferreira，杨克涛，陈克新
- 93
- High temperature characteristic of hydroxyapatite-titania
- 汪涛，张文彦，D.R.Annett，S.Sabine
- 94
- Preparation and modification of nano-sized Al2O3 powders through addition of oxide
- CHEN Yong，WU Yu-cheng，，
- 96
- Effect of fly ash content and grit size on mechanical and tribological properties of PVC composites
- 林健明，熊党生
- 97
- Fabrication of self-organized TiO2 nanotubes by anodic oxidation and their photocatalysis
- 陶海军，陶杰，汪涛，王玲，秦亮，徐璐璐
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9