ISSN: 1003-6326
CN: 43-1239/TG
CODEN: TNMCEW
Open Access
Vol. 15 Sepecial 2 April 2005
- 1
- Microstructure and crack sensitivity of electron beam welded titanium aluminide joints
- 吴会强，何鹏，何景山，冯吉才
- 2
- FEM analysis of stress evolution in twin wire welding of Al alloy
- 孟庆国，方洪渊，杨建国，姬书得
- 4
- Crystallization behavior of Ti3Al-Nb alloy laser beam welding joints
- 李俐群，陈彦宾，张春丽，雷正龙，徐广印
- 5
- Microstructure and mechanical performance of friction stir welded joints of AZ31 magnesium alloy
- 闫久春，许志武，李志远，李磊
- 6
- Simulating weld hot crack of T-type joints of aluminum plates with ANN
- B. Yakushin，D. Semin
- 9
- Numerical simulation on stress field of subsection welding of 2219 aluminum alloy flat
- 刘雪松，姬书得，方洪渊
- 11
- Self-learning fuzzy neural network control for backside width of weld pool in pulsed GTAW with wire filler
- 张广军，陈善本，吴林
- 12
- Influence of welding sequence on welding residual stress of aluminum alloy flat butt welding
- 姬书得，刘雪松，方洪渊，孟庆国
- 13
- Effects of fluxes with single component on weld depth in A-TIG welding of magnesium alloy
- 林三宝，杨春利，何万斌，戴鸿滨，朱琦
- 14
- Interaction behaviors between Zn-Al alloy and Al2O3p/6061Al composite with aid of ultrasonic vibration
- 许志武，闫久春，孔祥利，杨士勤
- 16
- Modeling mechanical properties of GTAW welds of commercial titanium alloys with artificial neural network
- H.K.D.H Bhadeshia，T.Sourmail
- 17
- Friction stir welding of 2219-T6 aluminum alloy
- 陈迎春，冯吉才，刘会杰
- 18
- Ultrasonic TOFD testing for aluminum alloy weld of thick plate
- 刚铁，徐艳，迟大钊，吕品
- 19
- Mechanical properties of welded joints in vertical-up variable polarity plasma arc welding of 2219 aluminum alloy
- 杨春利，郭立杰，林三宝，沈鸿源
- 20
- Joint performance in laser welding Al alloy with filler wire
- 陈彦宾，彭小云，方俊飞，张雅利，李俐群
- 21
- Influence of pin size on welding shape and mechanical properties of friction stir welded 2014 Al alloy
- 赵衍华，林三宝，吴林，曲福兴
- 22
- Friction stir welding characteristics of aluminum alloy plates with different thickness
- 刘会杰，冯吉才，陈迎春
- 23
- Numerical simulation and welding stress and distortion control of titanium alloy thin plate
- 刘雪松，姬书得，方洪渊
- 24
- Compression fracture behavior and mechanical properties of ultra high pressure solidified titanium-aluminium intermetallics
- 魏尊杰，李智伟，王宏伟
- 25
- Microstructure and mechanical properties of as-cast Ti-N alloy
- 朱兆军，米国发，尹冬松，王宏伟，曾松岩
- 28
- Grain refinement and mechanical properties improvement of casting A357 alloy by high pressure differential pressure casting process
- 王宏伟，魏尊杰，曾松岩
- 29
- Effects of cooling rate on microstructure and mechanical properties of A357 alloy during differential pressure casting process
- 马旭梁，王宏伟，曾松岩
- 31
- Experimental study and numerical simulation of isothermal closed die forging for aluminium alloy rotor
- 刘芳，吕炎，单德彬
- 33
- Sorption properties of Mg-Ni-CrCl3 hydrogen storage composite
- 吴欣，房文斌，王尔德，张文丛
- 34
- Thixoforming of spray deposited AlZn 12Cu2Mg2 wrought aluminum alloy in semi-solid state
- 杜之明，程远胜，赵九洲
- 35
- Preparation of wearable Al-20Pb alloy by powder milling and extrusion densification
- 房文斌，王新，贺文雄，王尔德
- 37
- Effects of hot deformation parameters on flow stress and establishment of constitutive relationship system of BT20 titanium alloy
- 徐文臣，单德彬，吕炎，李春峰
- 38
- Effects of carbon nanotubes on hydrogen storage property of Mg-based nanocomposites
- 于振兴，孙宏飞，王尔德，房文斌，张文丛，梁吉
- 39
- Shell and shrinking core kinetics model of Mg-based hydrogen storage alloys
- 于振兴，王尔德，张文丛，房文斌，孙宏飞，梁吉
- 40
- Effect of extrusion deformation on microstructures and properties of AZ31 magnesium alloy
- 王晓林，于洋，王尔德
- 41
- Study on electrical discharge coating with TiC ceramic layer
- 吴佩年，赵万生，王振龙
- 42
- Synthesis of TiAl based alloy by mechanical milling, warm pressing and reactive sintering
- 贺文雄，房文斌，王尔德，胡连喜，李达人，于洋
- 43
- Numerical simulation for elastic recovery of ultra-precision machined surface of OFHC copper
- 李旦，王洪祥，宗文俊，程凯，李付永
- 44
- Influence of technological parameters on coating speed of Pb-GF composite wire
- 耿耀宏，房文斌，孙宏飞，王尔德，江湘芸
- 46
- Effect of temperature on coating extrusion of Pb-GF composite wire by numerical simulation
- 孙宏飞，房文斌，王尔德，吴绍辉
- 48
- High strain rate superplasticity of TiNp/1N90Al composite prepared by powder metallurgy method
- T. Imai
- 51
- Dynamic scaling behavior of iron nitride thin films prepared by magnetron sputtering and ion implantation
- 李伟力，孙跃，费维栋
- 52
- Synthesis and thermal stability of multiwall carbon nanotubes reinforced aluminum metal matrix composites
- 张学习，邓春锋，王德尊，耿林
- 53
- Microstructure evolution of SiCw/AZ91 magnesium matrix composite during high temperature compression
- 李淑波，甘为民，郑明毅，吴昆
- 54
- Oxidized film on Cp/Cu-Cd electrical contact material
- 邵文柱，甄良，李义春，崔玉胜，周劲松
- 58
- Elevated temperature compressive deformation behavior of 2024Al matrix composite reinforced by sub-micro Al2O3 particles
- 栾佰峰，武高辉，孙东立，张强，苟华松，
- 59
- Mechanical properties and damping capacities of magnesium alloys processed by equal channel angular extrusion(ECAE)
- 吴昆，胡小石，郑明毅
- 60
- Effect of ZrO2 on crystallization behavior of lithium aluminosilicate glass-ceramic powders by polyacrylamide gel method
- 吴松全，刘宇艳，赵亮，王福平
- 61
- Processing of commercial magnesium alloys by different-speeds-rolling technique
- T. Imai，N. Saito，I. Shigemastu
- 62
- High temperature compressive deformation behaviors of extruded AZ91 magnesium alloy
- 甘为民，吴昆，李淑波，郑明毅
- 64
- Electric conductivity and percolation threshold research of Cu-Cu2O cermet
- 邵文柱，谢宁，甄良，冯立超，李义春
Superintended by The China Association for Science and Technology (CAST)
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9
Sponsored by The Nonferrous Metals Society of China (NFSOC)
Managed by Central South University (CSU) 湘ICP备09001153号-9